Use a wind blocker in your Alfa Romeo Spider 916 to heavily reduce windblown hair, ear and neck discomfort, draught around your legs and poor acoustics.

The model specific Windblockers Toplift offers are of very high quality, manufactured from the highest quality materials such as special woven mesh and steel tubular frame, covered with a hard wearing leatherette.

Please note that this wind deflector is tailored for the Alfa Romeo Spider 916 model year 1994-2006, and not a one-size-fits-all solution.

The windblocker is fitted in approximately 30-60 minutes by drilling two holes. Start with placing the wind deflector to rest on the back section. Then hold the wind deflector in the height you feel is correct (see pics to compare). Then make a mark with a pen on where the holes shall be made, one on each side. Then you can use a very sharp knife to cut an X (the same size as the diameter of the hole) where the hole shall be placed. Then, using a thin drill make the first hole. Switch to a thicker drill (compare what is needed in diameter with the attachment device). Then, it is time to place the attachment advice though the hole on the inside of the car, then ad a bracket on the back and then screw a nut to fasten it. Then you are ready to mount the wind blocker in place. See pictures to the left of the complete steps of mounting the wind blocker.

The wind defector is supplied with instructional picture/pictures (the same ones used here on the web page). We rarely get any questions on how the simple installation is made. But if you do have questions, we will try our very best to help you.

Delivery time: normally approx 2 weeks